Vaddio BRC-H900 Operating - Manual (Page 29)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
About On-Screen Menus
29 GB
Adjusting and Setting With Menus
About On-Screen Menus
You can change various settings, such as shooting
conditions and system setup of the camera, while
observing menus displayed on a connected monitor.
This section explains how to read the on-screen menus
before starting menu operations.
For full details of menu configurations, see page 75.
Note
You cannot perform pan/tilt and zoom operations while
the menu is displayed.
Main Menu
To display the main menu, press the DATA SCREEN
button on the supplied Remote Commander or the
MENU button on the RM-BR300 Remote Control Unit.
1 Cursor
Selects a setting menu.
Move the cursor up or down by pressing the
V or v
button on the Remote Commander or by inclining
the joystick of the RM-BR300 Remote Control
Unit forward or backward.
2 Menu items
To display a setting menu, select it using the
V or v
button on the Remote Commander or the joystick of
the RM-BR300 Remote Control Unit, and press the
HOME button on the Remote Commander or the
top button of the joystick on the RM-BR300.
3 Option card indicator
Displays the name of the interface card inserted into
the card slot of the camera.
Setting Menus
The setting menu selected on the main menu is
displayed.
1 Setting menu
The name of the menu currently selected is
displayed here.
2 Cursor
Selects a setting item.
Move the cursor up or down by pressing the
V or v
button on the Remote Commander or inclining the
joystick of the RM-BR300 Remote Control Unit
forward or backward.
3 Setting items
The setting items for this setting menu are
displayed.
To change a value, select the item using the
V or v
button on the Remote Commander or the joystick of
the RM-BR300 Remote Control Unit, and press the
B or b button on the Remote Commander or incline
the joystick on the RM-BR300 right or left.
4 Set value
The currently set values are displayed.
To change a set value, use the
B or b button on the
Remote Commander or the joystick of the RM-
BR300 Remote Control Unit.
For the default value of each setting item, see
“Menu Configuration” on page 75.
<MENU> OPT
>EXPOSURE
COLOR
DETAIL
COLOR DETAIL
KNEE
GAMMA
FLICKER CANCEL
FOCUS
PAN TILT
SYSTEM
VIDEO OUT
SD
SD-SDI
<SYSTEM>
>IR RECEIVE ON
IMG FLIP OFF
PAN REVERSE OFF
TILT REVERSE OFF
DISPLAY INFO ON
SYNC MASTER HD
HPHASE 03
HPHASE FINE 0
STEADY SHOT OFF
COLOR BAR OFF
TALLY MODE LOW
VERSION 1.00