Vaddio BRC-H900 Operating - Manual (Page 35)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
COLOR DETAIL Menu
35 GB
BLACK LIMITER: Adjusts the amount of the image
enhancer signal that is added to black side. The
adjustable range is –99 to +99. This function is not
available when SETTING is set to OFF.
V DTL CREATION: Sets the original signal for
creating the vertical image enhancer signal. The
available item is NAM (either G or R, whichever is
the greater), Y, G, and G+R. This function is not
available when SETTING is set to OFF.
KNEE APT LEVEL: Adjusts the amount of the image
enhancer signal that is added to higher area than the
knee point. The adjustable range is –99 to +99. This
function is not available when SETTING is set to
OFF.
COLOR DETAIL Menu
The COLOR DETAIL menu is used to adjust the color
detail function.
SETTING
You can adjust the image enhancer signal level that is
added to the specific hue. When SETTING is set to OFF,
the image enhancer signal level becomes same on the
entire picture.
LEVEL: Adjusts the image enhancer signal level that is
added to the specific hue. The adjustable range is –
99 to +99. This function is not available when
SETTING is set to OFF.
AREA INDICATION: When this setting is set to ON,
the area of the color that is adjusted on the image
enhancer setting displays as the zebra pattern.
When exiting from the menu, the zebra pattern
remains. Set to OFF to exit from AREA
INDICATION. This function is not available when
SETTING is set to OFF.
SATURATION: Adjusts the range of colorfulness (the
depth of the color) that is adjusted on the image
enhancer setting. The adjustable range is –99 to
+99. This function is not available when SETTING
is set to OFF.
PHASE: Adjusts the center value of the region of tint
that is adjusted on the image enhancer setting. The
adjustable range is from 0 and 130 to 359. This
function is not available when SETTING is set to
OFF.
WIDTH: Makes the region that is adjusted on the image
enhancer setting wider with center of color that is
set on PHASE. The adjustable range is 0 to 90. This
function is not available when SETTING is set to
OFF.
<COLOR DETAIL>
>SETTING ON
LEVEL 00
AREA INDICATION OFF
SATURATION 00
PHASE 130
WIDTH 40