Vaddio BRC-H900 Operating - Manual (Page 58)

In
s
ta
llat
ion
a
nd
Conne
c
tio
ns
Installation
GB 58
5
Attach the wire rope to the materials near the
ceiling.
Use an M5 (3/16 inch) hexagon socket head cap
screw (not supplied). Attach the wire rope to an
area independent of the area where the ceiling
bracket is attached.
6
Attach the wire rope to the ceiling bracket (A).
Pass the wire rope through the fixing hole and
attach its end to the attachment hole on the bracket
using the supplied one screw (3M4 × 8).
7
Insert the protrusions on the ceiling bracket (A) into
the spaces prepared in the ceiling bracket (B) with
the a hole in the front of the ceiling bracket (A)
aligned with the
hole on the ceiling bracket (B),
and temporarily attach them by turning the ceiling
bracket (A) with the camera clockwise.
8
Secure the ceiling brackets (A) and (B) using the
supplied three screws (3M3 × 8).
For attaching the wire rope to the bracket, use
only the supplied screw. Using another screw may
disable the function of the wire rope.
Ceiling bracket (B)
Ceiling
Attachment materials
M5 (3/16 inch)
hexagon socket head
cap screw
Wire rope (supplied)
3M4 × 8 (supplied)
Wire rope (supplied)
Ceiling bracket (A)
Fixing hole for wire rope
Caution
1
2
Ceiling bracket (B)
Align.
Ceiling
Ceiling
bracket (A)
a hole
hole
Ceiling
3M3 × 8
(supplied)