Vaddio BRC-H900 Operating - Manual (Page 34)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
DETAIL Menu
GB 34
MATRIX
Enhances or reduces a specific color region without
changing the white balance focusing point.
SELECT: Selects the built-in preset matrix for matrix
computation from STD, HIGH SAT, or FL LIGHT.
This function is not available when MATRIX is set
to OFF.
LEVEL (color level): Adjusts the color intensity of the
picture. The adjustable range is –7 to +7. The color
intensity increases in the + direction, and decreases
in the – direction.
This function is not available when MATRIX is set
to OFF.
PHASE: Adjusts the tint of entire picture. The
adjustable range is –99 to +99. This function is not
available when MATRIX is set to OFF.
R-G. R-B, G-R, G-B, B-R, B-G: Adjusts the hue of
entire picture by setting the balance of R, G, and B
signal individually. The adjustable range is –99 to
+99. This function is not available when MATRIX
is set to OFF.
DETAIL Menu
The DETAIL menu is used to adjust the image enhancer
function.
SETTING (image enhancer)
You can add the image enhancer signal. Set this function
to ON or OFF.
LEVEL: Adjusts the amount of the image enhancer
signal. The adjustable range is –99 to +99. The
larger the setting level, the higher the image
enhancer signal. This function is not available when
SETTING is set to OFF.
FREQUENCY: Adjusts the center-frequency of the
image enhancer. The adjustable range is –99 to +99.
The larger the setting level, the higher the center-
frequency of the image enhancer, the narrower the
image enhancer signal. The smaller the setting
level, the lower the center-frequency of the image
enhancer, the wider the image enhancer signal. This
function is not available when SETTING is set to
OFF.
CRISPENING: Adjusts the fineness of the subject that
is added the image enhancer signal. The adjustable
range is –99 to +99. When the larger value is set, the
micro-image enhancer signal decreases, and the
noise decreases with only the large image enhancer
signal remained. When the lower value is set, the
micro-image enhancer signal increases but the
noise increases. This function is not available when
SETTING is set to OFF.
H/V RATIO: Adjusts the ratio between the horizontal
and vertical ingredients of the image enhancer
signal. The adjustable range is –99 to +99. The
larger the setting level, the higher the vertical
ingredient of the image enhancer. This function is
not available when SETTING is set to OFF.
WHITE LIMITER: Adjusts the amount of the image
enhancer signal that is added to white side. The
adjustable range is –99 to +99. This function is not
available when SETTING is set to OFF.
<DETAIL>
>SETTING ON
LEVEL 00
FREQUENCY 00
CRISPENING 00
H/V RATIO 00
WHITE LIMITER 00
BLACK LIMITER 00
V DTL CREATION Y
KNEE APT LEVEL 00