Vaddio BRC-H900 Operating - Manual (Page 55)

In
s
ta
llat
ion
a
nd
Conne
c
tio
ns
Installation
55 GB
Installation and Connections
Installation
Attaching an Interface Card
Attach an Interface Card (not supplied) to the card slot
on the rear of the camera.
1
Loosen the two screws to remove the card slot
cover.
2
Insert an optional Interface Card into the card slot.
Align both ends of the card with the sliders inside
the slot, then insert the card securely as far as it will
go.
3
Tighten the two screws on the Interface Card.
To remove the Interface Card
Loosen the two screws on the Interface Card and pull the
card out straight and slowly.
Interface card
(not supplied)