Part description nm 3196, T description nm 3196 – Goulds Pumps NM 3196 i-FRAME - IOM User Manual
Page 17
Part description NM 3196
3196
3796
HT 3196
CV 3196
LF 3196
3198
NM 3196
Casing
Impeller
Cover
Power end
Figure 6: NM 3196 part description
This table describes the pump casing parts.
Table 3: Casing
Part
Description
Discharge
Top-centerline
Casing ventilation
Self venting
Sealing
Viton O-ring
Mounting method
Integral foot support for maximum resistance to misalignment and distortion due
to piping loads.
Standard flange
ANSI class 150 flat-face flange
Construction
material
Fiber-reinforced vinylester, ribbed for strength
Impeller
The impeller is
• fully open
• screwed onto the shaft
• made of fiber-reinforced vinylester cast on an insert made of Hastelloy C. The insert provides threads
and the support and rigidity needed to mount the impeller.
The threads are sealed from the pumped liquid by a Teflon O-ring.
Cover
The NM 3196 is supplied with a/an
Product Description
Model NM 3196 i-FRAME Installation, Operation, and Maintenance Manual
15