Festo Кабели и принадлежности - Manual (Page 135)

6. Diagnosis and error treatment
6−15
Festo P.BE−SPC200−COM−PDP−EN en 0901c
6.5 Diagnosis via programmer/PC
In addition to the bus configuration, some software programs
also provide the following functions:
ć Commissioning/test
ć Diagnosis
In order to test the SPC200 with the aid of a programmer/PC,
you will require e.g. communication processor CP 5410 from
Siemens.
Connect the programmer/PC to the PROFIBUS−DP interface of
the SPC200.