Festo Контроллер крайних положений SPC11 - Manual (Page 12)

Contents and general instructions
X
Festo P.BE-SPC11-DNCM-EN en 0204NH
Notes on the use of this manual
This manual contains special information on installing and
commissioning the SPC11 in conjunction with drive type
DNCM-...-POT.
The SPC11 is available in different designs. In this manual the
SPC11 with multipin connection is described as an example.
Detailed information on the different designs can be found in
the relevant system manual for the SPC11.
General information on the method of operation, fitting, in-
stalling and commissioning pneumatic drives with the SPC11
can be found in the system manual P.BE-SPC11-SYS-... .
Manuals for the SPC11
Manual Title Contents
System manual
Soft Stop SPC11 electronics/
pneumatics P.BE-SPC11-SYS... General instructions on installing
and commissioning
Drive-specific supplement for operat-
ing the SPC11 with a certain drive,
e.g. with the DNC-... (e.g. this manual) P.BE-SPC11-...-... Special installation and commission-
ing instructions as well as parameter
settings for the appropriate drive
1)
1) These manuals contain the permitted drive-valve combinations, drive diameters and mass loads
as well as the parameter settings valid here for the SPC11.
Please note
For installation and commissioning you will require the
system manual as well as the manual “Drive-specific
supplement” for the drive used.