Festo Контроллер крайних положений SPC11 - Manual (Page 20)

1. Installation instructions for the DNCM-...-POT
1-8
Festo P.BE-SPC11-DNCM-EN en 0204NH
Proportional directional control valve ( 5 )
See also system manual type P.BE-SPC11-SYS...
Work port 2 of the proportional directional control valve must
be connected to the cylinder port which is on the side with
the electrical connection for the potentiometer.
1
1
2 4
1 Electrical connection
Fig. 1/3: Tubing connection for slide mode