Festo Контроллер крайних положений SPC11 - Manual (Page 22)

1. Installation instructions for the DNCM-...-POT
1-10
Festo P.BE-SPC11-DNCM-EN en 0204NH
• Use fastening elements which will permanently resist the
acceleration forces.
Recommendation: Use the following fastening elements from
Festo:
Fastening elements Type
Foot fastening HNC-...
Flange fastening FN-...
• Avoid installing restrictors in the supply line.
• If necessary, provide a sufficiently large supply of energy
in order to minimize the effects of transverse forces on
the positioning behaviour.
• Use a suitable guide for withstanding transverse forces.
• Grease the external guide at suitable maintenance inter-
vals (see manufacturer’s instructions).
• Connect the drive, the guide and the load free of play in
the direction of movement and flush with each other.