Festo Контроллер крайних положений SPC11 - Manual (Page 26)

1. Summary of components
1-14 Festo P.BE-SPC11-DGP-EN en 0012NH
Fixed stops (
8 )
With drives of type DGP(I)L-... you can use e.g. the shock ab-
sorber support (without shock absorber) type KYP-... as the
fixed stop. The cushioning path of the internal end position
cushioning should not project into the work stroke used.
Fit the fixed stops outside the cushioning path.
1 2 2
3 3
1
Drive end position
2
Permitted end position (example)
3
Cushioning path of the internal end position cushioning
Fig. 1/5: Cushioning path
Specifications on the cushioning length of the drive used can
be found in the operating instructions for the drive and in the
Pneumatics catalogue.