Festo Контроллер крайних положений SPC11 - Manual (Page 30)

1. Summary of components
1-18 Festo P.BE-SPC11-DGP-EN en 0012NH
Using the complete cylinder stroke
If using complete the cushioning length, please observe the
following:
– If the DGP(L)-... is used, the potentiometer must be longer
than the cylinder stroke used. There must be an electric
reserve. The following maximum stroke lengths can be
used:
Measuring system length
[mm] Max. usable stroke length
[mm]
225 215
300 290
360 350
450 440
500 490
600 590
750 735
1000 985
1250 1230
1500 1475
1750 1720
2000 1965
S Mount the measuring system and the drive symmetrically,
so that the centre of the measuring system stroke
matches the centre of the complete drive stroke (see also
System manual type P.BE-SPC11-SYS-...).
– The resulting positioning times depend on the actual
stroke length used.