Festo Электрический терминал СРХ - Manual (Page 13)

Contents and general instructions
XI
Festo P.BE−CPX−CEC−E N en 1004a
Notes on the use of this manual
This manual refers to the following firmware and software
versions:
ć CoDeSys controller CPX−CEC−C1 from Rev 01
ć CoDeSys controller CPX−CEC and CPX−CEC−M1 from
Rev 05
ć Programming environment CoDeSys provided by Festo
from Version 2.3
This manual contains information on the function, fitting,
installation and commissioning of the CoDeSys controller.
Further information on the device can be found in the
following documentation:
Type Title Description
Short
manual "CoDeSys controller"
type P.BE−K−CPX−CEC Connection and display elements, mounting,
installation and technical data
Online help Online.Help for the
CoDeSys controller
CPX−CEC−... Configuration, commissioning, operation and
error diagnosis
Tab. 0/1: Additional documentation on the device
General basic information on the mode of operation, on fitĆ
ting, installing and commissioning CPX terminals can be
found in the CPX system manual, type P.BE−CPX−SYS−...
Observe also the user documentation of the components
used in the CPX terminal.