Festo Электрический терминал СРХ - Manual (Page 19)

1. System summary
1−3
Festo P.BE−CPX−CEC−EN en 1004a
1.1 The CoDeSys controller CPX−CEC/CPX−CEC−...
The controller is available in the following variants:
Variant Characteristics
CPX−CEC−C1 CoDeSys controller with CANopen interface
CPX−CEC−M1 CoDeSys controller with CANopen interface
and function library for SoftMotion
CPX−CEC CoDeSys controller with RS232 interface
Tab. 1/1: Variants of the CoDeSys controller
All variants offer...
ć Programming with CoDeSys provided by Festo as per
IEC 61131−3
ć Programming and communication via Ethernet
ć Process visualisation within CoDeSys provided by Festo,
with a
type FED operator unit or with the software VipWin
via Ethernet
ć Additional process visualisation systems can be conĆ
nected via the supplied OPC server if they have an OPC
client.
ć The CoDeSys controller controls a CPX terminal in the
Stand Alone or Remote Controller operating mode.
ć Communication over fieldbus in connection with the use
of the respective fieldbus node in the CPX terminal
ć Control configuration of CoDeSys provided by Festo for
commissioning, programming and diagnosis of the
system
ć Connection of a handheld of type CPX−MMI. The handheld
is used to display status and diagnostic information and
for fast commissioning of the CPX modules in the CPX
terminal.