Festo Электрический терминал СРХ - Manual (Page 58)

3. Commissioning
3−6
Festo P.BE−CPX−CEC−EN en 1004a
Automatic module configuration
· Perform the [Scan module configuration] function if you
want to perform module configuration automatically.
The I/O modules of a CPI module are not included in autoĆ
matic module configuration. In this case, carry out a manual
module configuration (see next section) or perform the
"Scan" function in the "CP Modules" tab.
Fig. 3/3: "CP Modules" tab