Festo Электрический терминал СРХ - Manual (Page 21)

1. System summary
1−5
Festo P.BE−CPX−CEC−EN en 1004a
1.2 Supported motor controllers
The CoDeSys controllers CPX−CEC−C1/−M1 as CANopen
masters support all motor controllers from Festo.
CPX−CEC−M1 with SoftMotion functions supports the
following motor controllers:
Motor controller Required firmware 1 from Version...
CMMP−AS 3.5.1501.2.1
CMMS−AS 1.3.0.1.11
CMMS−ST 1.3.0.1.7
(the versions 1.3.0.1.10 and 1.3.0.1.12 are
not supported)
SFC−LAC 1.0.5
SFC−LACI 1.0
CMMD 1.4
1) See rating plate for FCT plug−in of the motor controller
Tab. 1/2: Supported motor controllers with CPX−CEC−M1
(date: June 2010)
CPX−CEC−C1/−M1 support up to 31 axes. We recommend
operating the CPX−CEC−M1 with a maximum of eight axes.