Kramer Electronics VP-8x4 - Manual (Page 24)

Flash Memory Upgrade
21
8.3 Upgrading Firmware
Follow these steps to upgrade the firmware:
1. Double click the desktop icon: “ Shortcut to FLIP.EXE” .
The Splash screen appears as follows:
Figure 9: Splash Screen
2. After a few seconds, the Splash screen is replaced by the “ Atmel – Flip”
window:
Figure 10: Atmel – Flip Window
3. Press the keyboard shortcut key F2 (or select the “ Select” command from
the Device menu, or press the integrated circuit icon in the upper right
corner of the window).
The “ Device Selection” window appears: