Model informations – WIKA CS4L User Manual
Page 6
Operating Instructions Temperature Indicating Controller CS4H / CS4L
V1.1
•
05/2006
- 6 -
1. Model informations
1.1 Model name and order code
CS4 - 3 A / M - B - - -... Series name CS4_
H
CS4H: W48 x H96 x D100mm
Model
L
CS4L: W96 x H96 x D100mm
Control
characteristic
3
PID
(setable
control
parameter)
(1)
Alarm 1 (A1)
A
Process value monitoring, output relay
(2)
R
Relay
S
Logic level (DC 0/12 V) for solid state relay
Control output
A
Analogue current signal (4 ... 20 mA)
Input
M
Multi-function input (input configuration setable)
(3)
H
AC 100 ... 240 V, 50 ... 60 Hz
Power supply
L
AC/DC 24 V
Case colour
B
Black
B
Factory
adjustment
Instrument configuration
# (?)
To customers specification
2AS
(4)
Alarm output 2: process value monitoring
2AR
(4)
Alarm output 2: control loop monitoring
2AL
(4)
Alarm output 2: process value and control loop moni-
toring with common terminals
W10
(4) (5)
Heater burnout alarm for 1 phase (max. 5 A)
W11
(4) (5)
Heater burnout alarm for 1 phase (max. 10 A)
W12
(4) (5)
Heater burnout alarm for 1 phase (max. 20 A)
W15
(4) (5)
Heater burnout alarm for 1 phase (max. 50 A)
DR2
(4)
2. control output (three step control) relay
DS2
(4)
2. control output (three step control) logic level
DC 0/12 V for solid state relay
DA2
(4)
2. control output (three step control) analogue current
signal (4 ... 20 mA)
CR5
(6)
Serial interface RS 485
P24
(7)
Transmitter supply DC 24 V max. 30 mA
R50
Shunt resistor 50
Ω for input signals 0/4 ... 20 mA
Options
KAB Terminal
cover
(1) PID, PI, PD, P and ON/OFF action are programmable.
(2) 9 types of alarm action, no alarm action and energized/deenergized are selectable by key operation.
(3) The input configuration can be selected from the user by the front keys.
(4) Only 2 options can be added from Alarm output 2, Heater burnout alarm and 2. control output.
(5) For control output analogue current signal heater burnout alarm cannot be added.
(6) When serial communication is added, SV1/SV2 external selection (standard function) does not work.
(7) 2. control output and heater burnout alarm cannot be added, when transmitter supply DC 24 V is added.