WIKA DI35 - Manual (Page 13)

5 Transport, packaging and storage
WIKA operating instructions digital indicator model DI35-M 13
4 Design and function
4.1 Short description
The digital indicator DI35-M is a multi-function and highly accurate digital
indicator. It has a multi-function input with 29 different calibrated input
configurations, which can be selected via the terminal configuration and by
the selection of the input signal in the instrument configuration. Furthermore
the possibility of sensor calibration and linearisation with up to 30 points is
offered.
The standard features are completed by the adjustable sampling rate and
display time as well as the input offset for the correction of zero offsets or
sensor drifts and TARA and HOLD function. The measured value or one of
the functions can be indicated and used as output signal.
As an option up to 4 fully programmable alarm outputs, an analogue output
signal, a serial interface and a transmitter power supply are available.
4.2 Scope of delivery
The scope of delivery is:
 Indicator
 2 fixing elements
 Seal
 Operating instructions
Cross-check scope of delivery with delivery note.
5 Transport, packaging and storage
5.1 Transport
Check instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting. Keep the packaging as it
will provide optimum protection during transport (e.g. change in installation
site, sending for repair).