2 personnel qualification, 3 special hazards, Personnel qualification – WIKA DI35 User Manual

Page 7: Special hazards

Advertising
background image

2 Safety

WIKA operating instructions digital indicator model DI35-M

7

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and
damage to equipment.

 The activities described in these operating instructions

may only be carried out by skilled personnel who have
the qualifications described below.

 Keep unqualified personnel away from hazardous areas.


Skilled electrical personnel
Skilled electrical personnel are understood to be personnel who, based on
their technical training, knowledge of measurement and control technology
and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out work on
electrical systems and independently recognising and avoiding potential
hazards.
The skilled electrical personnel have been specifically trained for the work
environment they are working in and know the relevant standards and
regulations.
The skilled electrical personnel must comply with current legal accident
prevention regulations.

2.3 Special hazards

DANGER!
Danger of death caused by electric current.
Upon contact with live parts, there is a direct danger of
death.

 Electrical instruments may only be installed and mounted

by skilled electrical personnel.

 Operation using a defective power supply unit (e.g. short

circuit from the mains voltage to the output voltage) can
result in life-threatening voltages at the instrument!

WARNING!

Do NOT use this product as safety or emergency stopping
device, or in any other application where failure of the
product could result in personal injury or material damage.
Failure to comply with these instructions could result in
death or serious injury and material damage.

Advertising