Kodak DX6490 - Manual (Page 38)

26
Chapter 2
Using the Flip-up Flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy
shadows. Flash is effective between 2 - 16 ft (0.6 - 4.9 m) in Wide angle @ ISO
140 and between 3.3 - 13.8 ft (1.0 - 4.2 m) in Telephoto @ ISO 200.
The flash setting can be changed in any Still mode except Burst. The default
flash setting is restored when you exit the mode or turn off the camera, except
in PASM mode (see
page 27 ).
Changing the Flash Settings
1 Slide the open flash button to open the flash unit.
The flash unit must be open to use the flash or change the flash setting.
2 Press the button repeatedly to scroll
through the flash options.
The active flash icon is displayed in the
EVF or LCD screen status area (
page 8 ).
Auto* (default)—flash fires when
the lighting conditions require it.
Fill—flash fires every time you
take a picture, regardless of the
lighting conditions.
Red-eye*—flash fires once so the
subject’s eyes become accustomed
to the flash, then fires again when
the picture is taken (if the scene
requires Red-eye reduction).
Off—flash never fires (flash is
always Off when the flash unit is
closed).
* The flash may fire, even in bright outdoor conditions, if the background is
brighter than your subject.
Flash icon
open
button
Flash
button