Kodak DX6490 - Manual (Page 80)

68
Chapter 6
Returning to the Previous Menu
!
In the Setup menu, highlight Return ,
then press the OK button.
You are returned to the menu screen
from which you entered Setup.
Changing the Default Print Quantity
The Default Print Quantity setting determines the value that is displayed on the
Share Print screen (see
page 64 ). The default value is 1.
1 Press the Menu button.
2 Press to highlight Setup , then press the OK button.
3 Press to highlight Default Print
Quantity , then press the OK button.
4 Press to select the new default
quantity, then press the OK button.
5 Press the Menu button to exit the menu.
This setting remains until you change it.
Turning Off Quickview
After you take a picture or video, Quickview displays it on the camera screen
for approximately 5 seconds (see
page 24 and page 46 ). To save battery
power, turn off Quickview.
1 Press the Menu button.
2 Press to highlight Setup , then press the OK button.