Kodak DX6490 - Manual (Page 51)

39
Chapter 2
Setting Sharpness in PASM Mode
Use the Sharpness setting to highlight or blend the edges of the subject in your
pictures.
NOTE: Sharpness is available in PASM mode only.
1 In PASM mode, press the Menu button.
2 Press to highlight Sharpness , then press the OK button.
3 Press to highlight an option, then
press the OK button.
Sharp—increases contrast on the edges
of the image. Ideal when you want to
improve the clarity of an image, or if you
later may want to crop the image.
Standard (default)—use when no
special effect is needed. Ideal for everyday
pictures.
Soft—softens the edges of the image.
Ideal for a "soft focus" effect.
4 Press the Menu button to exit the menu.
This setting remains until you change it
or use Reset (see
page 40 ) to return to the
default setting.