Konica Minolta bizhub C550 - Manual (Page 156)

Useful transmission functions 6
C550 6-12
6.4 Sending the fax after erasing shadows (Frame Erase)
Frame Erase
When the original is scanned while the ADF is open, there may be a black
shadow around the original at the time of scanning the booklet original and
the original may be faxed with that black shadow. Frame Erase function eras-
es the black shadow on Top, Bottom, Right, and Left of original when a
booklet is scanned.
2
Note
Can be used in both original glass and ADF.
The frame erase quantity can be set within a range of 0.1 - 50 mm (1/16
- 2 inch) with a scale of 0.1 mm (1/16 inch).
Initial Frame Erase value at the time of purchase: 5.0 mm (3/16 inch)
Following functions cannot be used simultaneously.
Long Original
Sending a fax after setting the Frame Erase
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to “Loading the original” on
page 2-13.
3
Touch the buttons in order of [Scan Settings], [Erase].
Ordinary
transmission
Frame erasure
transmission
Width of
erasure