Konica Minolta bizhub C550 - Manual (Page 366)

Reports and Lists 10
C550 10-11
10.4 Broadcast Report
Broadcast Report is printed automatically when sequential broadcast trans-
mission is completed.
“ON/OFF” can be set in [Sequential TX Report] of the Utility mode. Report
output timing (all destinations/each destinations) can be specified in [Broad-
cast Result Report].
2
Note
For details on [Sequential TX Report] and [Broadcast Result Report], refer
to “Specifying Report Printing Methods (Report Setting)” on page 9-88.
Destination: Any of the following is described.
-
Destination name for recipients’ whose destination name is registered in
Address Book.
- Recipient’s destination
Start Time: Describes the start time of the communication.
Time: Fixed in “--:--:--”.
Prints: Describes the number of pages sent. The sent pages and the total
number of pages are described in fractional format.
Result:
OK Described when communication is terminated normally.
S-OK Described when communication has stopped.
PW-OFF Described when operation power switch was turned OFF during commu-
nication.
TEL Described when there is telephone call.