Konica Minolta bizhub C550 - Manual (Page 395)

Appendix 11
C550 11-8
11.4 Fax Index
Terms that are generally used for fax transmission are explained.
Terms of the functions that are not stored for this function are also explained.
Terms Description
2in1 A function to send the page set as double-paged after mixing the 2 page
original on one paper.
Abbreviation/Ad-
dress A function to register the fax number of the destination where fax is fre-
quently sent. When abbreviation/address is to be registered, if the desti-
nation name and the searched character is registered, it is even possible
to specify the destination using the searched character of the abbreviat-
ed selection.
Alternate forwarding A function to forward the received original manually in stand using the
setting confirmation button of the touch panel. Alternate forwarding is set
when the operation is interrupted due to no paper or misfeed when Fax/
Scan screen is displayed.
Background Re-
moval A function to send the original after adjusting the brightness of the back-
ground color of the original.
Batch transmission A function to auto send one original at a specified time when the trans-
mission conditions of destination, sending time, memory transmission or
resolution etc. are stored in the same original memory.
Baud rate Specifies the transmission speed of the modem for fax.
In this function, the fax can be communicated at a high transmission
speed of 33,600bps. When set to overseas communication mode, com-
munication is at high transmission speed a with a noise of 7200bps or
4800bps.
bps Abbreviation of bit per second.
bps is the amount of data sent in 1 second as the unit of data transmis-
sion.
Broadcast A single original is sent to many recipients in one operation.
Bulletin board This function posts the originals to be viewed, or stores the originals to
be transmitted through polling.
Confidential com-
munication A function for sending and receiving originals to be viewed only by spe-
cific persons. The sent confidential original is saved in a confidential box
on the recipient’s fax machine and is not printed when it is received. The
received original can be printed if a specific operation is performed, for
example, the access code for the confidential box is entered.
Default value The setting value specified in advance when the machine was shipped
from the factory. Some default settings can be changed from the Utility
mode. It is convenient when frequently used value is set as default set-
tings depending on the usage conditions.
Dial method There are three types: PB (push-button (tone) dialing), 10PPS (pulse dial-
ing at 10 pps), and 20PPS (pulse dialing at 20 pps).
Binding Position A function for specifying the binding position of a double-sided original
sent using the ADF. There is top/bottom binding, where the binding po-
sition is at the top (or bottom) of the original, and there is left/right bind-
ing, where the binding position is at the left (or right) of the original. The
top and bottom positions of the second side of the original differ.