Konica Minolta bizhub C550 - Manual (Page 171)

Useful transmission functions 6
C550 6-27
– Touch [1-Sided] or [2-Sided] to specify Simplex/Duplex printing.
– Touch [Corner] or [2 Position] to specify the staple margins and
touch [None] to cancel the staple margins.
6
Touch [Close].
Returns to Scan Settings screen.
7
Touch [OK].
Returns to Fax/Scan screen.
8
Set other functions if required.
– For details on Scan Settings, refer to “Specifying the scan condi-
tions” on page 2-20 or “Scan Settings” on page 6-2.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
9
Specify the destination.
– For details on specifying destination, refer to “Specifying only one
destination” on page 2-24 and “Specifying multiple destinations
(broadcast transmission)” on page 2-37.
10
Press [Start] key.
– To stop the transmission, refer to “Stopping the transmission” on
page 2-54.
– When fax cannot be sent, refer to “Troubleshooting” on page 4-2.
The scanned original is stored in the memory as a scheduled job and
transmission is started. It is copied at the same time.