Konica Minolta bizhub C550 - Manual (Page 173)

Useful transmission functions 6
C550 6-29
Sending the fax after specifying TX Stamp
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to “Loading the original” on
page 2-13.
3
Touch buttons in order of [Scan settings], [Application].
4
Touch [TX Stamp].
– Touch [TX Stamp] once again to cancel the settings.
5
Touch [Close].
Returns to Scan Settings screen.
6
Touch [OK].
Returns to Fax/Scan screen.
7
Set other functions if required.
– For details on Scan Settings, refer to “Specifying the scan condi-
tions” on page 2-20 or “Scan Settings” on page 6-2.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
8
Specify the destination.
– For details regarding specifying destinations, refer to “Specifying
only one destination” on page 2-24 and “Specifying multiple desti-
nations (broadcast transmission)” on page 2-37.