Konica Minolta bizhub PRO 920 - Manual (Page 161)

11 Utility Tools
11-6 bizhub PRO 920 Scanner
Printing Setting window
[Print]
Specify the number of copies to output.
[After transfer copier work]
- [print immediately]
The copier outputs image data immediately after reception.
- [proof print and wait]
The copier outputs one copy and stops after receiving image data. Printing
setting can be configured on the copier's Touch Panel. Pressing the START
button restarts printing.
- [wait]
The copier stops after receiving image data. Printing setting can be config-
ured on the copier's Touch Panel. Pressing the START button starts printing.
00_920_scan_e.book Page 6 Thursday, April 28, 2005 5:04 PM