Konica Minolta bizhub PRO 920 - Manual (Page 32)

Before Using the Scanning Features 3
bizhub PRO 920 Scanner 3-9
!
Detail
You can search by at minimum one character.
If the search results are too many, press the [Search] key to add search
letters (The search letters you entered are saved until you operate scan-
ning).
Pressing the [Cancel] key cancels the input search letters, and the search
letter input screen closes.
3.4.2 Searching a box/file
In the Copied Data Processing Features, you can search quickly the desired
box out of the boxes created on the internal HDD by its UserBoxNumber.
Also, if you know the Folder Name, Box Name and File Name, you can per-
form the Direct Call.
Number Search
In the [Box] screen, you can search the registered UserBoxNumber by using
the [Number Search] key.
The following is how to use the [Number Search] key.
1
Press the [Number Search] key.
The Number Search screen appears.
2
Input the UserBoxNumber you want to search, press the [OK] key.
The screen appears to display the list of files that are in the correspond-
ing box.
When a corresponding box does not exist, the message "No corre-
spondent box" appears. Confirm the UserBoxNumber, and return to
the step 1 to repeat the procedures.
00_920_scan_e.book Page 9 Thursday, April 28, 2005 5:04 PM