Konica Minolta bizhub PRO 920 - Manual (Page 56)

About the Copied Data Processing Features 4
bizhub PRO 920 Scanner 4-21
3
Configure the necessary items.
– For more information on the
configurations on the Scanner
Setting Basic screen, refer to
"About the Copied Data Storage
Setting Screen" on Page 4-25.
4
Set an original and press the [Start] button.
The transmitting screen and the continuous storage confirmation
screen appears.
5
Connect to the copier through PageScope JobEditor installed on the
computer, and store the copied data. PageScope JobEditorServer re-
ceives data automatically.
– For more information on how to operate PageScope JobEditor, re-
fer to "PageScope JobEditor" on Page 11-3.
– For more information on how to operate PageScope JobEditorS-
erver, refer to "PageScope JobEditorServer" on Page 11-9.
– PageScope JobEditor and PageScope JobEditorServer for USA
are excluded.
– About how to obtain PageScope JobEditor and PageScope
JobEditorServer, contact your service representative.
6
To continue storing data, press the [Yes] key. To finish storing data,
press the [No] key.
– Pressing the [Yes] key displays the setting screen. Return to the
step 3 and repeat the procedures.
00_920_scan_e.book Page 21 Thursday, April 28, 2005 5:04 PM