Konica Minolta bizhub PRO 920 - Manual (Page 57)

4 About the Copied Data Processing Features
4-22 bizhub PRO 920 Scanner
HDD to PC
You can transmit copied data stored on the internal HDD to a computer to
store them by using PageScope JobEditor/PageScope JobEditorServer.
PageScope JobEditor or PageScope JobEditorServer needs to be installed
and configured.
!
Detail
For more information on PageScope JobEditor, refer to ""PageScope
JobEditor" on Page 11-3.
For more information on PageScope JobEditorServer, refer to "Page-
Scope JobEditorServer" on Page 11-9.
PageScope JobEditor is connected manually to the copier. PageScope
JobEditorServer is connect automatically to the copier. For information
on switching between the manual and automatic connection, refer to
"Changing Data Transmission Method to PC" on Page 4-28.
PageScope JobEditor and PageScope JobEditorServer for USA are ex-
cluded.
About how to obtain PageScope JobEditor and PageScope JobEditorS-
erver, contact your service representative.
Transmit copied data stored on the internal HDD to a computer in the
following steps.
1
Press [Box] on the control panel and
then press [Store] key.
2
Press the [HDD to PC] key.
00_920_scan_e.book Page 22 Thursday, April 28, 2005 5:04 PM