Konica Minolta bizhub PRO 920 - Manual (Page 70)

About the Copied Data Processing Features 4
bizhub PRO 920 Scanner 4-35
4.11.2 The flow of operation of the Wait Output and Proof Output
Change settings
Change settings
Output the one sheet
for a confirmation
Exit the operation
as it is.
Exit the operation
as it is.
Output it by the present settings
Output it by the present settings
If it is in the state in which an output is
possible, [Start] button will shine green
In case of Wait Output
One sheet is outputted
In case of Proof Output
The confirmation screen asks you
whether to continue to recall data
The screen which confirm settings appears
Select a setting to change
and press the [Change] key
Screens vary depending on
the selected settings.
Press the [Exit] key
Press the [Proof Print] key
Press the [Cancel] or [Close] key
Press
the [Close] key
Output Application screen appears
Machine screen appears
Press the [Start] button
It is outputted
Confirm the outputted paper
Yes No
One sheet is outputted
Confirm the outputted paper
If you exit the job and you don't output it,
plese delete the present job from the
[Reserve] of [Job List] screen.
"Proof Stop" on the left above the screen
blinks and no more job is output.
For more information on the method of job
deletion, refer to the User's Guide of the
Copier.
Change settings and
press the [OK] key
Settings will be decided
Setting change is canceled
Repeat the step 4 (p.4-32)
and the succeeding steps
of "Output from the Internal
HDD"
00_920_scan_e.book Page 35 Thursday, April 28, 2005 5:04 PM