Konica Minolta bizhub PRO 920 - Manual (Page 93)

6 Configuring Destination for the Network Scanner Features
6-8 bizhub PRO 920 Scanner
– [UserBoxNumber]
Input a 9-digit (000000001-999999998) UserBoxNumber. Press the
[UserBoxNumber] key to change your UserBoxNumber. The boxes
in which scanned data are stored are managed by 9-digit UserBox-
Number. Be sure to record this number.
You need the number when you import scanned data from comput-
ers.
– Boxes of a same box number can be prepared. For a same box
number, one box with password and boxes without password of in-
finite number as far as the disk capacity permits can be prepared.
However, a same registration name cannot be used.
– [Register Name]
Input the Name that is displayed on the Select Destinations/Stor-
age Locations screen (HDD) within 24 characters in alphameric
characters and signs.
– If a Name is not input, the UserBoxNumber will be registered as a
Name.
– [Character for Search]
Used as a search keyword when you search destinations. Needs to
be input within 24 characters in alphameric characters and signs.
– [Password]
Input a 8-digit Password for a box in alphameric characters and
signs.
– Eight "*"s are displayed regardless of the number of characters you
input.
5
Press the [Register] key.
Pressing this key brings you back to the Select Destinations/Storage
Locations screen (HDD).
6
Make sure that the registered Name
is displayed.
!
Detail
If the desired Name is not displayed on the page, press / to
switch between pages.
An administrator is to edit/delete once registered destinations. For more
information, contact your administrator.
00_920_scan_e.book Page 8 Thursday, April 28, 2005 5:04 PM