Konica Minolta bizhub PRO 920 - Manual (Page 34)

Before Using the Scanning Features 3
bizhub PRO 920 Scanner 3-11
4
Input the File Name and press the
[OK] key.
– When a corresponding file does
not exist, the message "Failed
direct call" appears. Confirm
that the Folder Name, Box
Name and File Name are correct, and return to the step 1 to repeat
the procedures.
The screen appears with the desired file being selected.
!
Detail
For more information on how to input characters, refer to "How to Input
Characters" on Page 3-7.
If the desired file is not found, you are brought back to the list screen, and
the message is displayed on the upper left of the Touch Panel.
00_920_scan_e.book Page 11 Thursday, April 28, 2005 5:04 PM