Konica Minolta bizhub PRO 920 - Manual (Page 115)

7 Using the Network Scanner Features
7-16 bizhub PRO 920 Scanner
7.5 Transmission to the SMB server
When you send the scanned data to an SMB server, necessary procedures
depend on whether the SMB server is registered in advance or it is input
manually.
!
Detail
Refer to the following pages.
"When an SMB server is Already Registered" .................... p.7-16
"When an SMB server is Input Manually" ........................... p.7-18
When an SMB server is Already Registered
1
Press the [Scan] on the control panel.
The Select Destinations/Storage Locations screen appears.
2
Press the [SMB] key.
– In the initial settings, the Select
Destinations/Storage Locations
screen (E-Mail) is displayed. For
information on the initial settings
of the Scan screen, contact your
administrator of the copier.
3
Press the Name of the destination
SMB server.
– You can refine the registered
destination by the search func-
tion. For more information on
how to search, refer to "How to
Search" on Page 3-8.
– You can refine the Name by the search function. For more informa-
tion on the search function, refer to "The keys on the Select Desti-
nations/Storage Locations Screen" on Page 7-3.
– To deselect the Name, press the selected Name again.
– If you input a destination manually, refer to "When an SMB server
is Input Manually" on Page 7-18.
00_920_scan_e.book Page 16 Thursday, April 28, 2005 5:04 PM