6 transmission to a group – Konica Minolta bizhub PRO 920 User Manual

Page 119

Advertising
background image

7

Using the Network Scanner Features

7-20

bizhub PRO 920 Scanner

7.6

Transmission to a Group

To send the scanned data to a registered Group, follow the steps below.

!

Detail

For more information on how to register a Group, refer to "Registering a
Group" on Page 6-13.

1

Press the [Scan] on the control panel.

2

Press the [Group] key.

In the initial settings, the Select
Destinations/Storage Locations
screen (E-Mail) is displayed. For
information on the initial settings
of the Scan screen, contact your
administrator of the copier.

3

Press the Name of the destination
Group.

To deselect the Name, press the
selected Name again.

Press the [List] key and then
press the [Group] key to display
the list of registered destina-
tions.

Press the [Edit] key on this screen to change what to include in a
Group.

The group which has been selected as the destination cannot be
selected.

4

Press the [Scan Setting] key.

The Scanner Setting Basic screen
appears.

00_920_scan_e.book Page 20 Thursday, April 28, 2005 5:04 PM

Advertising