Konica Minolta bizhub PRO 920 - Manual (Page 128)

Configuring the Network Scanner features 8
bizhub PRO 920 Scanner 8-7
8.2 Reading in from HDD
To read scanned data sitting on the hard disk of the print controller to a com-
puter, you need either of the following. These are also used to delete
scanned data from the hard disk.
-
KONICA MINOLTA Scanner Driver and TWAIN-compliant software
- PageScope Scan Direct
!
Detail
Refer to "PageScope Scan Direct User's Guide" about how to use Pag-
eScope Scan Direct.
When the Security Strengthen mode is ON, A scanned data is unacquir-
able using applications compatible with TWAIN and network scanner
driver. For more information, contact your administrator.
To unload the image stored using Scan Direct or KONICA MINOLTER
Scanner Driver, the optional printer controller is required.
Contact your service representative for details of the printer controller.
The following provides an information of how to use the Network Scanner
Driver.
8.2.1 Network Scanner Driver
When the KONICA MINOLTA Scanner Driver is installed, you can download
scanned data from the hard disk of the print controller to a computer using
TWAIN-compliant applications.
The scanner driver can be used on the following OS:
-
Windows 98/Me
- Windows NT 4.0
- Windows 2000/XP
When using the printing system as a scanner, the printing system is required
to be connected to the computer through the network. The parallel port on
the print controller does not support scanning work.
It is necessary that the PC and the network interface card should be as-
signed appropriate IP addresses, and that the TCP/IP network are enabled.
00_920_scan_e.book Page 7 Thursday, April 28, 2005 5:04 PM