Konica Minolta bizhub PRO 920 - Manual (Page 130)

Configuring the Network Scanner features 8
bizhub PRO 920 Scanner 8-9
8.3 To install the Network Scanner Driver
To install the scanner driver, perform the following procedure.
1
Turn on the computer and start Windows.
– Exit from all active Windows applications, if required.
2
Set the CD-ROM (920_920P_V100 CD) on the CD-ROM drive.
3
As the CD-ROM is booted automatically, select the [Install scanner].
4
Select [TWAIN Driver].
– Conduct the installation following the wizard.
An install wizard of KONICA MINOLTA Scanner Driver starts.
00_920_scan_e.book Page 9 Thursday, April 28, 2005 5:04 PM