Konica Minolta bizhub PRO 920 - Manual (Page 52)

About the Copied Data Processing Features 4
bizhub PRO 920 Scanner 4-17
4.7 Selecting a Storage Location
If you want not to print but to store copied data, select a storage location by
using the [Store] screen.
Copied data can be stored in either of the following three types of storage
locations.
Scan to HDDStoring data on the internal HDD enables you to print them
again anytime. Also, you can combine a print job sent from a computer and
copied data to print as one job.
Scan to PCCopied data can be sent to a computer. You can edit/process the
data to print.
HDD to PCCopied data stored on the internal HDD can be sent to a compu-
ter. You can edit/process the data to print.
Scan to HDD
You can store copied data on the internal HDD in the following steps.
0 A file can be registered to 10000 at the maximum for every box.
1
Press [Box] on the control panel and
then press [Store] key.
2
Press the [Scan to HDD] key.
3
Select a folder in which you store data.
– When you select a Personal
Folder
– Press the [Personal Folder] key
to display the list. Select the
folder and press the [OK] key.
– If a Password is configured for
the folder, the Password input screen appears. Enter the Password
and press the [OK] key.
00_920_scan_e.book Page 17 Thursday, April 28, 2005 5:04 PM