Konica Minolta ScanDiva User Manual
Page 43
Advertising
Chapter 3 ScanDIVA TWAIN Driver
3-13
2
Place the “Setup Adjustment Sheet” on the Adjustment Plate as shown below.
NOTE !
Adjust the top of the Adjustment Sheet along with the Adjustment
Plate. Be sure to adjust the center of Setup Adjustment Sheet at the
center of cradle.
When the Glass Plate Unit has been attached, place the “Setup Adjustment Sheet"
on the Adjustment Plate, and close the Glass Plate Unit.
Glass
Setup Adjustment Sheet
Adjustment Plate
Cradle
Advertising