6 black shading, Black shading -16 – Konica Minolta ScanDiva User Manual
Page 46
Advertising
ScanDIVA User’s Guide
3-16
2.6 Black Shading
This adjustment is to read the fundamental data to calibrate the black shading level.
1
Remove the “Setup Adjustment Sheet” and the Adjustment Plate that were on
the cradle in the previous adjustment.
2
Select “5. Black Shading” on the pull-down list under “Detail & Adjustment”,
and then click “Run”.
3
Click “OK” on the confirmation screen to confirm the inability of User
Account Control during the adjustment.
4
The window indicating that adjustment is underway will appear. When the
window disappears, the adjustment is completed. Proceed to the next
adjustment, “2.7 White Shading”.
Advertising