Konica Minolta ScanDiva - Manual (Page 57)

Chapter 3 ScanDIVA TWAIN Driver
3-27
3 Deletion of ScanDIVA TWAIN Driver
When the Driver installed on the Personal Computer is no longer necessary, use the following
procedure to delete it.
1 Confirm that the Personal Computer is connected with the ScanDIVA.
2 Turn ON the Power Switch of the ScanDIVA.
3 Turn ON the Power Switch of the Personal Computer.
4 First select “Start”, and then “Setting”, “Control panel”, “System”,
“Hardware”, and “Device manager”.
5 Delete the “Imaging devices –Book Scanner ScanDIVA”.
6 When the delete confirmation screen appears, select “Delete the driver
software for this device” and click the “OK” button.