5 exposure time, Exposure time -15 – Konica Minolta ScanDiva User Manual
Page 45
Advertising
Chapter 3 ScanDIVA TWAIN Driver
3-15
2.5 Exposure Time
This Adjustment is to match the Exposure Level to the luminance of the installation
location.
1
Place the “Setup Adjustment Sheet” on the Adjustment Plate.
NOTE !
Refer to “2.4 CCD Gain” above to place the “Setup Adjustment
Sheet”. If the glass plate is attached, close it.
2
Select “4 Exposure Time” on the pull-down list under “Detail & Adjustment”,
and then click “Run”.
3
Click “OK” on the confirmation screen to confirm the test chart.
4
The window indicating that adjustment is underway will appear. When the
window disappears, the adjustment is completed. Proceed to the next
adjustment, “2.6 Black Shading”.
Advertising