5 scanning procedures, Scanning procedures -13 – Konica Minolta ScanDiva User Manual
Page 81
Chapter 4 Operation
4-13
5 Scanning procedures
1
Place the original face up on the book table.
REFERENCE
For placing the original, refer to Chapter 4, “4
”.
NOTE !
Place the original so that it will not go beyond the stopper.
原稿
ストッパー
2
Select either "Use Book Correction" or "Preference" from the original type in
Scan Mode as follows.
NOTE !
When an original with the thickness of a dictionary or textbook is
read, "Book Correction" should be clicked (enabled).
When a single page document is read, "Book Correction" should
be canceled (disabled).
When the Glass Plate Unit (option) is utilized, "Book Correction"
should be canceled (disabled).
When the "Book Original Mode" is selected from the Profile, "Book
Correction" is automatically activated (enabled).
REFERENCE
For details, refer to Chapter 3 “5
” and Chapter 4 “6
”.
Original
Stopper