Konica Minolta ScanDiva - Manual (Page 86)

ScanDIVA User’s Guide
4-18
7.2 Originals with a tag attached or bookmark placed
The Scanner may not work correctly when a tag is attached or a bookmark is
placed within 30 mm (1.2 inches) of the top and bottom edges as shown in the
figure.
In this case, remove the tag or bookmark before scanning.
In order to obtain optimum result of the book corrections, hide the bookmarks
away from the original.
BookMark
7.3 Originals with Folds, wrinkles or warps
If the original is folded, wrinkled or warped, flatten the original as much as
possible, and then place it on the book table for scanning.
30 mm (1.2 inches)
30 mm (1.2 inches)