7 white shading, White shading -17 – Konica Minolta ScanDiva User Manual
Page 47
Advertising
Chapter 3 ScanDIVA TWAIN Driver
3-17
2.7 White Shading
This adjustment is to read the fundamental data to calibrate the white shading level.
1
Place the Adjustment Plate on the cradle.
NOTE !
For the procedure to assemble the adjustment plate, refer to “2.1
Assembling the adjustment plate” and “2.2 Placing the adjustment
plate” in Chapter 7 “2 Appendix”
When the Glass Plate Unit has been attached, open the Glass Plate Unit, and place
the Adjustment Plate on the cradle
Advertising