Konica Minolta ScanDiva - Manual (Page 67)

Chapter 3 ScanDIVA TWAIN Driver
3-37
5.3 Detail Screen
1. White
Balance: Selects Auto or Manual in White Balance correction.
Auto:
Whenever the image is read, the white balance is calculated and
corrected.
The correction might not operate correctly, depending on the
condition of the original.
Manual (Auto OFF):
The correction is executed according to calculated numerical value in
the setup adjustment.
It should normally be set to "Manual (Auto OFF)".
2. Color Correction: Sets Color Correction to either enabled or disabled.
Enable: The hue is adjusted, and the image is output.
It should normally be set to "Enable (ON)".
Use Color Profile
The color correction is effective in exclusive ICC profile when it turns
“ON”.
The image output time is determined by the performance of the
personal computer when Color Correction is set to “ON”.
3. Sharpness: The sharpness of the image can be adjusted in 5 levels.
Noise Reduction
The image noise is reduced.
2
3
4
5
6
1