3 aging - 10min, Aging - 10min -10 – Konica Minolta ScanDiva User Manual
Page 40
Advertising
ScanDIVA User’s Guide
3-10
2.3 Aging - 10min
This adjustment is to stabilize the lamp and the CCD.
NOTE !
It will take time until the lamp is stable especially in the morning in
winter. In such a case, repeat the “Aging – 10min” procedure at least
twice.
1
Launch the application and the ScanDIVA TWAIN Driver.
2
Check “Adjustment” on the screen of the ScanDIVA TWAIN Driver.
3
Select “2. Aging - 10min” on the pull-down list under “Detail & Adjustment”,
and then click “Run”.
4
Click “OK” on the confirmation screen.
Advertising