Konica Minolta ScanDiva - Manual (Page 50)

ScanDIVA User’s Guide
3-20
2.9 Tone Curve
This procedure is to adjust the brightness of image by setting an appropriate value.
“A”, “M”, “19” in the Gray Scale are settable within these parameters.
This procedure is required only when the machine is installed or the optional glass
plate is attached.
NOTE !  KODAK Gray Scale (Q-13) is not included in the kit.
1 Place the Adjustment Plate on the cradle.
NOTE ! For the procedure to assemble the adjustment plate, refer to “2.1
Assembling the adjustment plate” and “2.2 Placing the adjustment
plate” in Chapter 7 “2 Appendix”